How Long Does Gorilla Glue Take to Dry? (Find Out Here)

Gorilla Glue is a very strong, high-quality adhesive that has been around for quite some time. It’s perfect for wood, metal, ceramic, and other porous materials. The only thing that makes Gorilla Glue different than other glue is the fact that it dries very quickly.

Gorilla Glue can be used on many different types of materials including paper, wood, plastic, and metal. The glue is thick and has a consistency similar to honey. It’s not recommended for use on fabric or skin, but it can be used on other surfaces without harming them.

While you can use Gorilla Glue in less than five minutes, it does take longer than other types of glue to dry completely. This can cause you to get impatient if you’re working on a project where time is crucial. So what is the right gorilla wood glue drying time.

How Long Does Gorilla Glue Take to Dry?Gorilla Wood Glue Drying Time

Gorilla Glue is a quick-set epoxy adhesive. It can dry in 10-45 seconds, depending on the temperature of the room and how thick of a coating you apply.

However, it takes 24 hours for Gorilla Glue to cure or harden completely. This is because Gorilla Glue contains butyl acetate, which is a solvent that helps the glue set quickly but also evaporates over time. The evaporation process creates a chemical reaction that hardens the glue.

Gorilla Glue Drying Time Factors

There are a number of factors that affect the drying time of Gorilla Glue:

How Much Glue is Used 

The amount of glue used makes a difference in how long it takes for the glue to dry because more glue means more water content in the adhesive. The more glue you use, the longer it will take for the product to dry completely.


The higher the humidity level, the slower it will take for your glue to dry. The reason for this is that water molecules have a tendency to bind with other water molecules, this makes them less likely to bond with other materials, including Gorilla Glue. 

If you live in a humid climate, you may have to wait longer than expected before your glue will harden completely.

The Type of Gorilla Glue

Gorilla Glue has many different types. Each type of gorilla glue has its own drying time. It’s important that you use the correct type of glue for your project so that it can be completed within a reasonable amount of time without compromising its strength or durability.

Type of surface

The type of surface you are applying the glue to is one of the most important factors in determining how long it takes for Gorilla Glue to dry. 

A large part of this depends on how much surface area there is and what type of material it is made from. For example, if you are using Gorilla Glue on a small project such as a wooden birdhouse or toy and you apply only small amounts of the glue, then it should dry within an hour or two. 

Meanwhile, if you are using Gorilla Glue on something like an outdoor deck or patio flooring made from concrete or asphalt, then it may take between 24 and 48 hours before the glue has completely dried out.


The temperature at which you are working (if it is hot out and the sun is shining down on your project, then the glue will dry quicker than if it is cold and windy).

How Long Does Gorilla Glue Take to Harden?

Gorilla Glue can take as little as five minutes or as long as 24 hours to dry and harden completely. The drying time depends on what surface you’re gluing together, how much glue you’ve used and how much pressure is applied to the bond.

How Long Does Gorilla Glue Take to Dry on Different Surfaces

The amount of time it takes to dry depends on the surface used and the temperature of the room.


Gorilla Glue on wood takes about 20-30 minutes to dry but fully cures in 24 hours. 


Gorilla Glue tends to work well with glass surfaces as well, although it can take 10-45 seconds for the glue to dry and 24 hours for it to fully cure.


The same can be said for metal surfaces, except it takes 10-45 seconds for the glue to dry and 24 hours for it to fully cure.


The manufacturer recommends allowing 5 minutes for Gorilla Glue to dry before applying pressure or weight to your project. 


Most rubber will take 1–2 hours to dry completely after you apply glue. The exact times vary based on the thickness of your rubber and how much glue you use.


You can apply Gorilla Glue to shoes in 10–45 seconds and get a solid bond within 30 minutes of exposure time.


Gorilla Glue takes about one to two hours to dry on plastic. It will be tacky for about 10 minutes after you apply it. After that, you should be able to peel off the excess glue from your plastic.

For best results, we recommend waiting 24 hours for the glue to fully cure before handling the surface.

You May Also Like